GEEKVAPE AMMIT MTL RDA REVIEW

FIRST IMPRESSION OUT OF THE BOX

DeucesJack: What’s up, everyone? DeucesJack at vapinginsider.com. Today, I got something a little different for you. I got a mouth-to-lung RDA for you. It’s the Geekvape Ammit Mouth-to-Lung RDA. Rocking it on top of my Desire Designs Cut Squonk mod, 22mm in diameter, 3 drip tips are included. Top airflow on this thing so it’s got a no leak design. Available in stainless steel, gold, blue, rainbow, black, gunmetal and this awesome looking violet one. It’s like a deep dark purple. Loving the look of that one in the pics that I’ve seen.

Let’s cut down low. Let me throw a build in it for you. Let me show you everything. We’re going to wick it up, juice it up, we’re going to come back on top, talk about it, cons, pros, out of here as usual. I’m going to see you downlow.

WHAT’S IN THE BOX

  • 1 Ammit MTL RDA
  • 1 0.7ohm Prebuilt Clapton Coil
  • 1 Stainless Steel MTL Drip Tip
  • 2 Delrin MTL Drip Tip
  • 1 Flathead Screwdriver
  • 1 Allen Key
  • 1 Spare Parts Pack
  • 1 MicroUSB Cable
  • 1 User Manual

Alright, everyone! Welcome to the downlow portion of this video. Today, we’re going over the Geekvape Ammit Mouth-to-Lung RDA. A little tour around the box. Ammit MTL branding over there, some Geekvape branding over there. On the back of the box, we got some stuff. Pause it if you want to read it. There is your scratch and check.

Geekvape Ammit MTL RDA Review

Let’s open this up. Let me show it to you. Here is the RDA. We’re going to put that to the side for a second so I can show you the contents of the box. In the box, you get 2 of these coils. I’m using one. You get a squonk pin in here but I have the traditional one in there because I replaced it already. A tri tool, a spare drip tip, o-rings and some spare decks screws. You also get this real funky looking long drip tip. Also included in the box is an Ammit Mouth-to-Lung RDA instruction manual, pretty concise with some really nice pictures. In the envelope, you get a bunch of paperwork, a Geekvape warranty card, file that to the side, a Geekvape Ammit card that shows you all the different colors. Love the purple, by the way. And you’ll also get a warning card.

FROM TOP TO BOTTOM

Here is the RDA up close. You’ll notice, you have multiple air holes right here that start off small and get bigger. Now if you want to run this wide open, that would be the widest open you can get it. That would be 1, 2, 3, 4, 5 air holes, all of them open. And that will give you a pretty tight direct-lung hit. However, if you want to tighten it up and you want to get a mouth-to-lung drawer, you can take this big hole and put it over any one of the holes as they get bigger and bigger and you can really dial in a nice mouth-to-lung drawer. This would be the loosest true mouth-to-lung drawer. This hole right here would be the tightest. Really really nice air flow configuration. I like the way they did that.

Geekvape Ammit MTL RDA Review

Here is your 510 style drip tip, 2 o-rings on it. Nice mouth-to-lung drip tip. Definitely does the job. Here is your barrel section. You’ll notice, there’s a little bit of a conical design going on in there but here’s the really unique thing. Your air flow is coming down from the circumference. The space between the barrel and the top cap, that’s where all your airflow is coming from. Kind of neat, the way they did that and what happens is your airflow comes in from there and then it hits the circumference of the barrel and goes through there and there. Kind of a neat airflow. They really did a nice job with it. They really did. I’m impressed. I didn’t think it was going to vape well but it actually does.

Geekvape Ammit MTL RDA Review

You have 2 o-rings that hold the barrel in place. Here’s your airflow slot that runs directly under the coil and on the side of it. And here is your airflow slot that comes from the back and underneath that as well. Let me move that coil out of the way so I can show you what I’m talking about. I move the coil around so you could see what’s going on on the deck.

Geekvape Ammit MTL RDA Review

This is your squonking hole right here and here is your airflow right here. Your airflow is hitting that coil like on a diagonal from underneath. So they did a nice job with that. They really did. When you squonk, your liquid flows into this deep juice well. Then there’s plenty space going around it inside especially on the front so your juice can definitely get around there and saturate those cotton wicks. You have a two post, one terminal per posts design. So this is an extremely easy deck to build on. I’m not even going to do a build on it. What you really want to do though, is you want to pull that coil when you place it in there. You want to pull that coil as close to that airflow as you can without shortening. When you put your leads in, you clip them over here. There’s plenty of space here so that your leads don’t hit the barrel in short. I like that they left a little space here. That’s a great design. It’s just a really nice mouth-to-lung vape especially considering it’s a top airflow RDA.

Geekvape Ammit MTL RDA Review

On the bottom of the RDA, we have some Ammit mouth-to-lung branding. As I told you before, I installed the gold-plated squonk pin. It does not come like that. Insulator ring around it, stainless steel threading here, some serial number over here and Designed by Geekvape. Again, 22 mm in diameter.

Geekvape Ammit MTL RDA Review

Focus On www.ave40.com For More Vape Tank.

 

WICKING

Let me show you how to wick this thing. My cotton of choice lately has been Native Wicks Platinum Blend. Shout out to them. We’ll probably have a link down below in this video as to where you can buy it. First thing you want to do is you want to slide yourself off a nice piece. Give it a little twirl in between your fingers, just like that. Get it nice and pointy. Send it through and you got to remember, we’re not using big, beefy coils here so you want to twist and hold as you’re pulling it through. You want to have a little bit of resistance and you want it to look something like that.

Geekvape Ammit MTL RDA Review

Now, since this is such a deep juice well and you want to have your wicks kind of on the long side, I cut them right around the top o-ring, right there. Same thing on the other side. I measure it out and right along that top o-ring. Now you want to take your coiling tool, whatever you use. I use a dental pick and just tuck them in there really nice and loosely so you have that capillary action going. That’s it, it’s all wicked up. Let’s put some juice on it.

Juice I’m going to be using today is from my man, David G. David Goerlitz, in case you’ve never heard of him, he’s the ex-Winston man in the 80s and he’s become an advocate for vaping now. He came out with his own line of juice. It’s nice to see him have some skin in the game because he does so much for this community. This is his Dreamland juice. The main goal of his juice line is to convert smokers so he does a lot of tobacco vapes. All of his juices are good. This is one of my favorite. It’s his Dreamland. It’s called, it’s a coffee and tobacco vape. Really nice vape, definitely check it out if you’re in the tobacco. So now it’s all juiced up.

We’re going to put the top cap back on. Let’s slap this thing on a mod and give it a vape. See you back on top.

GENERAL THOUGHTS

Alright, everyone! We’re back on top with the Geekvape Ammit Mouth-to-Lung RDA. I have to say, very very surprised that the flavor I’m getting off of this because I normally not a top airflow guy. I don’t like top airflow flavor, most of the time in most any type of atomizer. But the flavor on this one is actually pretty good. It’s built really well. The construction is typical Geekvape construction. It’s got a great airflow range that I showed you down low. You can do a tight, direct-lung hit or you can do a really tight mouth-to-lung hit so I like that. I’m going to give them kudos for doing a great airflow range. They include a bunch of awesome mouth-to-lung drip tips. Really really impressed by that. Super easy to build on and it’s got that interesting airflow that I showed you downlow where it comes down from the top around the whole circumference of the atomizer. I really like that. It’s innovative, it’s different and I got to say it surprised a hell out of me because I didn’t think it was going to be very flavorful but it actually is.

Geekvape Ammit MTL RDA Review

Let’s get into the cons and pros.

CONS

First con is going to be the post screws. I don’t like them. They’re kind of on the cheap side. They should have definitely been hex post screws.

It’s not a good dripper. That’s going to be another con. Because of those mouth-to-lung drip tips, you really only want to use this thing in squonk mode. To drip on this you got to pull the top cap off, just a pain in the neck. You can’t drip down the middle. Definitely put this thing in squonk mode when you get it. We’re going to give it a con for not being a good dripper.

It has that wispy type of airflow. Like that wispy type, almost like semi muted top airflow flavor that I’m not really digging. So that’s it on the cons.

Let’s move on to the pros.

PROS

First pro is going to be, I’ve said it before in this video, it’s got decent flavor for a top airflow. We’re going to give them a pro for that.

No leak design, you can squonk a hell of this thing and it will not be leak because the airflow is way up on top there. we’re going to give them a pro for that.

Innovative top airflow, I’m giving a pro for that. I’m very impressed by it.

Build quality, pro.

It’s great as a squonker, pro.

Geekvape Ammit MTL RDA Review

Easy to build, we’re going to give them a pro for that.

Great price point, right around 30 bucks and I tell you what, if you’re into mouth-to-lung vapes, this is worth the 30 buck chuck. No doubt about it.

Looks, I like the looks. I do. It’s got that barrel type of look to it. I think it looks great on the Cut Squonk mod with the black and white theme going on. I like the looks.
I also like the finish on it. The finish has held up well in my ultrasonic cleaner. It’s been in there a bunch of time and nothing has happened to it. They did a great job on the finish.

CONCLUSION

Check out the links down below as to where you can buy this awesome little RDA. If you’re into mouth-to-lung, I think you’ll really enjoy it.

Also, check out the link down below for the juice that I used today. David G. Dreamland. For those who don’t know David G, David Goerlitz is the ex-Winston man from the 80s. He’s got his own line of juices. He’s a huge advocacy guy and I’m glad to see him get some skin in the game and put his own juice line out there. They’re geared towards vapers that are transitioning from smoking. This is a caramel coffee tobacco vape. Really, really solid juice.

Now It’s Available :

Geekvape Ammit MTL RDA

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

 

Slydr-M – new from Sigelei

The Chinese company Sigelei, as always, pleases with new products. This time, the company introduced a new atomizer on the electronic cigarette market – Slydr-M with replaceable vaporizers.

Slydr-M - new from Sigelei

Generally, sabomny tank Slydr-M Sigelei – is an updated version of the previous tank Slydr-L . Slydr-L is a powerful (285 Watt) atomizer, a good tank volume (5.5 milliliters) and an excellent top-filling system. But how can his “brother” Syldr-M please its bathers, the announcement of which the company presented literally today on its YouTube channel?
So, the 53-mm atomizer is distinguished by its classic design – here the company did not offer anything new, in general. The device itself is made of durable stainless steel (again, nothing new) and of polyacetal – a special material that is a wear-resistant polymer. There are also silicone inserts.
Refueling fluid, like his previous “brother” – the top. You can fill the fluid in the device by pushing the lid back, which is quite convenient. As for the volume of the filled fluid, it is 2.8 milliliters.
The diameter of the drip tip is 15 millimeters, and it is also made of wear-resistant polymer.
As for the blowing adjustment ring, it is placed on the bottom of the device. Six hover options.
The electronic cigarette itself is very compact: its length is 53 mm and its diameter is 24.
Judging by the presentation of Sigelei, Slydr-M can work with brand SM evaporators (coils 0.2 Ohm, 0.15 Om and 0.4 Om).
There is also an RBA base for servicing the device yourself.

Slydr-M - new from Sigelei
Slydr-M - new from Sigelei
Slydr-M - new from Sigelei

And what about the power, which is so pleased in the previous version of the atomizer? Here, perhaps, everything is not so rosy: the maximum declared power is 120 watts, which, compared to the previous device, is not enough. However, it must be admitted that such power is more than enough, especially for beginner bathers.
As for the color range, Slydr-M Sigelei is presented in three colors: silver, black and gold.
We can say that this device is perfect for beginners as well as for those who do not bother with the appearance and some super-technical characteristics. Despite the fact that the company called this electronic cigarette the “advanced version” of the previous one, it is difficult to say that it is “advanced” – rather, updated and adapted to a specific target audience.

Now It’s Available :

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

VLS RDA by Oumier – confident bid for success with interesting stands

If you interview a group of average vapers about what they know about Oumier, then most of them should remember about their atomizers – Wasp Nano and Wasp Nano RDTA . Quite fair, because these devices are one level higher than other products of the company. It seems to me that with the new VLS RDA , the guys will succeed and repeat the line with a decent dripka 🙂
VLS RDA by Oumier -
The first thing I would like to note is that the guys from Oumier are not going to give up their branded chips. The novelty is available in the same variations as the Wasp series (although Resinoptions, so far, no). For those who are not satisfied with the version with PEI, the black and white versions are made of polycarbonate. There are not many real photos yet, but now I can say that I like the drip. It looks, of course, not as tiny and pretty as Wasp , but with some box with Resin inserts it should be cool 🙂
VLS RDA by Oumier -

Dimensions :

Height – 38 mm.
Diameter – 25 mm.
Weight – 35 g.
VLS RDA by Oumier -
Specifications :

If before engineers tried to “get” only to those who prefer to hover on one helix, then in the case of VLSdecided to expand the circle of potential buyers. So, the base of the dripka makes it possible to place one or two spirals and do it the way you want – horizontally or vertically. In principle, there is nothing difficult, but thanks to its versatility, the drip will definitely be in demand.
VLS RDA by Oumier -VLS RDA by Oumier -
The blowing system seems to me a bit incomprehensible and strange. As you can see, the cap has four holes on both sides. By the spirals air enters through the channels in the racks. All this, of course, is good, but it seems to me that the air will not always be good to “get”. Maybe I had such a feeling because of the renders of the manufacturer itself, and in practice everything will be different.
VLS RDA by Oumier -
The manufacturer found it necessary to specify the capacity of the drip – 1.5 ml. However, it is worth considering that this indicator can change depending on the winding and the amount of wool. It also indicates the ability to refuel dripku simply burrowing on top. I don’t know about you, but this process usually ends with a hot liquid in my mouth, so I would prefer to remove the cover and fill everything calmly. For those who have long forgotten what to fill a drip, they prepared a BF pin in the kit.

VLS RDA by Oumier -

Now It’s Available :

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

Vaporesso Drizzle Review | MTL Vaping Done Right!

Vaporesso Drizzle kit Intro

The Drizzle kit is another winner from Vaporesso! If you’ve been keeping up with them, you might have noticed their gear is continually getting better. From the Tarot Nano to their signature OMNI board, Vaporesso is bringing affordable vape gear to the masses with good designs, quality electronics, and the performance many vapers want.

The Vaporesso Drizzle kit is another example of that. It is a tube mod with a 1000 mAh built-in battery and a small 1.8 mL tank. It accommodates ceramic (CCELL) or traditional (kanthal) EUC mini coils (specifically made for this tank). It is patterned after all the other Vaporesso tanks coming out right now with that EUC coil-swap design, except that this is 100% for the MTL crowd.

No suspense here, I enjoy using this kit!

The basics of the Drizzle

vaporesso drizzle kit

This kit looks nice, but there isn’t really much to it. It’s a small tube mod with a side button and a tank that comes in all stainless steel or black with SS accents. It’s a classic form in that it looks like a miniature mech mod.The whole thing weighs about 64 grams with a full tank, and it’s ~18 mm in diameter (~0.7 inches) and about 91 mm in height (~3.6 inches) without the removable drip tip.

The top-fill tank holds 1.8 mL (TPD compliant) and it takes the Vaporesso EUC coils. They are easy to use and to swap out, with no mess whatsoever. Just turn the tank upside down, unscrew the base of the tank (while holding the glass portion), pluck out the small coil head and drop in a new one. It is a simple, yet clever design and it works as advertised.

Likes

  • No leaks at all!
  • Wicks well with from 70 VG to 70 PG
  • Warm vapor (but never too hot)
  • Top fill to tank
  • Easy to replace coils
  • Accurate and clean flavor
  • Sizeable vapor for an MTL device
  • Quick wicking on the coil heads
  • Easy-to-adjust airflow controller (and you can easily see where it is set)
  • Killer throat hit (if you use high nic)
  • No spitting or hot-popping

Dislikes

  • The button is sometimes hard to locate (especially if wearing winter gloves)
  • If you aren’t paying attention, it can slip out of the hands easily

Easy recommendation

If you like a small form factor, legit flavor, and a world-class MTL draw, you need to know the Drizzle has all that.

It would be easiest for me to compare it to the Nautilus Mini, and I think it’s better than that (so far). My first draw off of this had me doing the happy dance! The hit is just perfect.

The low price and ease of use is great, but the performance seals the deal. I strongly recommend this based on the performance I’ve gotten so far. And although I have only had it a couple weeks, I have not stopped using it as my go-to device . I can’t speak on the longevity of the Drizzle coils, but Vaporesso coils have a pretty strong track record in that department. Time will tell.

There is a new MTL kit on the block, and it’s called the Drizzle. It’s not flashy or equipped with a bunch of extraneous features, it’s just one helluva solid vape…

Now It’s Available :

Vaporesso Drizzle MTL Tube 1000mAh Kit

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

Vaporesso Target 75 VTC Kit Review

Sick of classic box mods and tube mods? Looking for a vaping device with a refreshing design, above-average power output and temperature control technology? Then the new Vaporesso Target 75 VTC may just be the mod you’ve been waiting for. Featuring a completely unique looking mod inspired by vintage gaming joysticks, a new ceramic coil sub-ohm tank that Vaporesso calls “a real game changer”, the Target 75 VTC kit was a breath of fresh air and a pleasure to review.

I for one had never heard of Vaporesso before, so I did a bit of a background check of the brand. It turns out they are an offshoot of Smoore Technology, a large Shenzen-based ODM/OEM company with a workforce of over 3,000 people that has been working with big names in the tobacco and e-cigarette industries since 2006. Through the Vaporesso brand, Smoore aims to use its extensive experience in vaping goods manufacturing to target the Western advanced vaping equipment market. Let’s take a look at one of their first offerings, the Target 75 VTC starter kit:

Vaporesso-Target-75-VTC-starter-kit

A Look at the Contents

The Vaporesso Target 75 VTC kit consists of a Target 75 VTC mod, a Target cCELL sub-ohm tank with a pre-installed ceramic kanthal coil head, a Ni200 ceramic coil head for temperature control vaping, a USB charging cable for the mod and a user manual. It’s a nice package, but like with most mods on the market these days, you’ll need to buy or make your own e-liquid, as well as batteries to be ready to vape.

Vaporesso Target 75 VTC mod

While it may not affect its performance, the design is one of the main selling points of the Target 75 VTC. Love it or hate it, you have to admit that this mod looks unlike any vaping device on the market today. If not for the classic 510 connection at the top, I could swear it was the upper part of one of those early 90’s joysticks that I used to play flight simulators with on my PC. It even has a plastic fire button styled like a joystick trigger. As an avid gamer, I have to say I love the design of the Target, and just looking at it and holding it in my hand really took me on a walk down memory lane. At the same time, I realize that it’s very different than what most mods look like, and that it may not appeal to everybody.

Vaporesso-Target-VTC-mod

The plastic buttons, for example may seem cheap to some, but they really do fit in the overall gaming feel of the device, and they are actually quite sturdy and responsive. The body of the Target 75 VTC, on the other hand looks and feels to be of high quality. Made of zinc alloy and stainless steel, it has a ceramic coating that feels very smooth and yet ensures a nice grip, in part thanks to the ergonomic design of the unit.

The battery compartment of the Vaporesso Target 75 VTC is so well camouflaged that when I first saw the micro-USB port at the bottom of the device, I thought it had a built-in rechargeable battery, so I plugged it into my computer for charging. The display turned on and it showed a fully charged battery icon. Only when I unplugged it, the screen turned off and pressing the fire button three or five times didn’t do anything. Confused, I decided to take a look at the user manual, and discovered that the back of the mod, which is covered with a leather-textured plastic was the battery cover and that you need to insert an 18650 battery to power it.

Vaporesso-Target-VTC-display

After reading the manual, I noticed the battery cover does feature a couple of red arrows showing you which way to pull in order to detach it, but I had thought them only aesthetic elements and wouldn’t have figured out the “puzzle” myself. You need to grab the plastic-covered part of the mod and yank it off to access the battery compartment. Be sure to put some muscle into it, as this magnetic battery cover doesn’t come off as easily as on mods like the Koopor Mini or SMOK X Cube 2. On the bright side, it also doesn’t wobble at all.

I prefer to use an external charger to recharge my batteries, but you can also use the USB cable included in the kit to recharge the battery without taking it out of the mod. As I understand, the micro-USB port can also be used to update the firmware of the device in the future.

Vaporesso-Target-VTC-mod-connection

The top side of the Target 75 VTC houses a stainless steel 510 connection with a spring loaded pin, while the bottom of the device features battery venting holes. On the side of the device, you have the trigger-like fire button, an OLED display and two ‘+’ and ‘-‘ buttons to adjust the wattage and temperature in TC mode.

Using the Target 75 VTC is a fairly straightforward affair. Pressing the fire button five times in rapid succession powers on the device. Repeating the process tuns it back off. You can rotate the display by pressing the fire button three times rapidly, and lock it for safe storing by keeping the fire button and ‘+’ pressed for three seconds. Once the display shows the “System Locked” message, you can safely put in your pocket or purse without having to worry about accidental activation.

Vaporesso-Target-75-VTC

Like the VPark TC100 VT/VW box mod, the Vaporesso Target 75 VTC completely does away with a setting menu, relying instead on button combinations and automatic atomizer resistance detection. For example, to switch between wattage and temperature control modes, you simply keep the ‘+’ and ‘-‘ buttons pressed for three seconds. Whenever you change atomizers, the device asks you to confirm if it is a new coil or the same to help it better detect the resistance. It does a good job in this regard, always showing accurate readings of the coils I used.

The Target also detect the kind of coils you are using. When trying to vape in temperature control mode with a kanthal wire coil head, the “Not Ni200 coil” message shows up on screen, and it switches to wattage mode. On the other hand, when trying to use an Ni200 coil in wattage mode, it allows you to do so.

Vaporesso-Target-mod

In wattage mode, the Target 75 VTC has a range of 5W – 75W, while in the temperature mode, it goes from 300°F-600°F/150°C-315°C. A small con I want to mention here is that scrolling through the wattage and temperature settings is a bit slow. Going from the lowest wattage, 5W, all the way to the full 75W, takes a full 45 seconds. Other high-power mods tend to pick up speed if you keep the button pressed long enough, but not the Target. Otherwise, the mod works great in both wattage and temperature mode, and has probably the lowest fire delay of all the mods I’ve ever used. Just press the button and it fires almost instantly.

In terms of user safety, the Target 75 VTC includes all the features we usually see in regulated mods: overheating protection, low battery protection, short circuit protection, low resistance protection and reverse battery polarity protection.

Vaporesso-Target-mod-closeup

Focus On www.ave40.com For More Vape Kits.   

 

Target cCELL Tank

While the Target 75 VTC mod was a very nice surprise, the true star of the Vaporesso starter kit is the tank, or, more precisely, the revolutionary cCELL coils it comes with.

Design-wise, the Target tank doesn’t really stand out from the dozens of high-quality sub-ohm tanks on the market these days. Made of stainless steel and pyrex glass, the 22 mm, 3.5 ml, bottom-filling tank looks rather average, but in this case, it’s what is inside that counts.

Vaporesso-Target-tank

Vaporesso believes its new cCELL ceramic coil will be a “real game changer” and there are quite a number of notable voices in the community that actually agree, based on preliminary impressions. What really sets this new product apart from all the rest is that the heating element is completely wickless. Instead of cotton, it uses a special kind of porous ceramic developed by Vaporesso. The kanthal coil is cast inside the ceramic through a process known as sintering.

Vaporesso admits that there is a piece of organic cotton used in the cCELL, but it is wrapped around the outside of the ceramic cylinder, acting as an anti-leakage sealant. The cotton does not come into direct contact with the heating element, and does not influence the taste of the vapor. The heating process takes place inside the ceramic cylinder.

Vaporesso-tank

According to Vaporesso, “the ceramic coil maximizes the efficiency of e-liquid absorption and heating, it produces the same level of vapor at a lower wattage setting compared to most mainstream coils, with the extra benefits of no spitting, no dry hits, self cleaning, better flavor and a longer life-cycle”. That’s a great marketing statement, but at least some of what they say is actually true.

The cCELL ceramic coil heads produce the clearest flavor I have ever gotten as a vapor, and I’ve tried a few things. I’m a big fan of RDAs and good quality tank coil heads like those of the SMOK TFV4, but flavor-wise, the ceramic technology of the cCELL is sensibly superior. With cotton wicking, the taste of any juice begins to change after a few refills, but that just hasn’t happened to me while using the cCELL.

Vaporesso-Target-tank-mouthpiece

Even more impressive is the so-called self-cleaning of the ceramic element. It just so happens that my very first experience with the cCELL coil was a very unpleasant one. I had trusted Vaporesso’s recommendation to use the pre-installed o.9Ω coil head at 35 watts, for the best flavor and vapor production. I filled the Target Tank with some Space Jam Andromeda Juice, left it to saturate for a good 30 minutes, and took a hit. It was one of the worse dry hits I have ever gotten.

Now, if that had happened with a cotton wick coil head, it would have been ruined, but this is ceramic w’re talking about here. All I did was lower the wattage to 25 watts, let the heating element cool off for a few minutes and when I took the second hit, there was no noticeable burnt taste. I later learned that was thanks to the self-cleaning properties of the porous ceramic. Even if you crank the wattage too high, because there is no cotton coming into contact with the heating element, the burnt taste isn’t permanent.

Vaporesso-cCELL-ceramic-coil

As for why I got a dry hit at 35 watts, well, the math wasn’t really right to me from the start. I usually vape at 30 – 35 watts with 0.5Ω coils, so the 0.9Ω one didn’t really make much sense, but I thought I’d follow the manufacturer’s recommendation. It didn’t work out, but even at 22 – 25 watts, I got amazing flavor and above average vapor production.

Regarding the life-cycle of the ceramic coil head, I can see it being longer than cotton wick ones, especially when using high VG or dark e-liquids, which tend to generate high amounts of gunk, affecting the flavor of the juice. What I can say is that I have been using the same cCELL coil head for a week now and it’s still going strong.

Vaporesso-cCELL-coil-head-design

Design-wise, cCELL coil heads are almost identical to the ones for the Aspire Atlantis, and Vaporesso confirms that they are actually compatible with the Atlantis and a number of other popular sub-ohm tanks, which is definitely a plus. If you don’t need another tank, but want to check out the capabilities of this new ceramic technology, you can just buy cCELL coil heads separately.

Unfortunately, there are not a lot of resistances to choose from for the cCELL at this time. The Vaporesso Target 75 VTC comes with an 0.9Ω kanthal coil head for variable wattage mode, and an 0.2Ω Ni200 coil head for temperature control. While 0.9Ω is still technically sub-ohming, and it produces a decent amount of vapor, it’s not going to chug the vapor. But, personally, I don’t think it’s meant to. Instead, I think it’s meant o emphasize the great flavor you get from using the cCELL.

Vaporesso-cCELL-coil-head

The Ni200, on the other hand, is a real cloud machine, although on the Target 75 VTC mod you need to crank up the temperature a bit higher than on other high-wattage mods in order to really bring the best out of it. However, with the controversy surrounding nickel coils right now, I don’t know if it was really the best choice of material. The scary thing is that inexperienced vapers are using Ni200 coils in wattage mode, which can cause them to release toxic elements. They are only meant for temperature control, but some people don’t know this, so maybe it would be best if the industry would move on to other materials completely, just to be safe. We already have a couple of better options, like titanium and stainless steel, so hopefully Vaporesso will release other temperature control options in the near future.

Overall, I was really pleased with the cCELL coil heads – did I mentioned they are 24K gold-plated – the flavor was phenomenal, the self-cleaning thing was a nice surprise, they are compatible with a wide variety of tanks, and just the fact that they bring something new to the table really impressed me. I do still have some doubts about whether they area real game changer, though. For example, we don’t yet know much about this ceramic material. Vaporesso claims that it will not crumble and release dust particles larger than 12µm into the vapor, thanks to the cotton layers wrapped around the ceramic cylinder filtering them, but we’ll just have to wait and see if that is actually true.

Vaporesso-cCELL-ceramic-closeup

For now, though, the cCELL looks very promising.

In conclusion, the Vaporesso Target 75 VTC starter kit turned out to be a massive surprise for me. I had never heard of this brand before, I wasn’t really expecting much, but the whole package just blew me away. The build quality and design of the Target mod is superb, it performs as it should both in wattage and TC modes, and it’s really easy to use and set up. The Target Tank is your run of the mill sub-ohm tank, but it’s carried by the new ceramic cCELL coil heads, about which I’m sure we will be hearing a lot more of in the very near future.

Value wise, the Vaporesso Target starter kit is decently priced at $80 at Heaven Gifts. It might seem like a lot of money, and I’m not saying it’s the cheapest package on the market, but remember that you are getting a high-quality, high-power variable wattage/temperature control mod and a sub-ohm tank with potentially revolutionary ceramic coils. It’s not a bad deal, to be honest, and the price is sure to go down as the Vaporesso brand gains some traction and more shops start carrying its products.

Vaporesso-Target-75-VTC-mod

Now It’s Available :

Vaporesso TARGET VTC 75W VT/VW Starter Kit

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

Vaporesso Veco One Review | An AIO for Direct Lung Hits

Vaporesso Veco One Intro

The Veco One is a new pocket friendly all-in-one (AIO) kit from Vaporesso that combines a 1500mAh battery with a matching 2mL Veco tank and uses their Eco Universal Coils (EUC). The EUCs are touted as “affordable and better for the environment”.

The tube shaped Veco One is available in black and silver, and Vaporesso will also offer an expansion kit to double the included Veco Tank capacity from the EU TPD limit of 2ml to 4ml.

Like any other AIO, the Vaporesso Veco One kit should provide a portable, easy, and satisfying vaping experience at times when you don’t need or want a full-size mod. Does it deliver? Let’s take a closer look to find out.

Vaporesso Veco One Specs and Features

For those who aren’t familiar, the ECU is a cartridge based approach to replacement coils. Instead of unscrewing a complete coil assembly from the tank, you remove the base of the tank and pull out the ECU, which is essentially the core of the coil assembly. Push in a new ECU, reassemble the tank and you’re quickly back in business.

I found dealing with the EUC is a bit easier and a bit cleaner, but really, how hard is it to unscrew a standard coil? I suppose if it does save us money and results in less junk in our landfills, it’s a win-win.

But more so, the big news is the performance of the ECU, which is detailed below.

Performance

vaporesso_veco_one

It really doesn’t get much easier than this: Charge, add juice, vape.

For this review, I used the installed 0.3Ω ceramic ECU. The top fill tank allows plenty of room to accept a standard glass dropper and I easily filled it with no mess. I did not prime the ECU but waited a few minutes for it to become saturated.

Five clicks on, and my first vape was a real eye opener – this ain’t your father’s Ego kit. The 40W Veco One produced a surprising amount of thick, warm vapor and the ceramic ECU gave some of the best flavor I have experienced from a pre-made coil.

At the same time, my wife immediately turned and asked “What was that?” Yep – it whistles, and I haven’t seen the dog since. No, it’s not horribly loud, but definitely noticeable. Trying different airflow settings might have had a minor effect but it continued to whistle through the entire range of adjustment.

Getting back to the performance, all of the warm vaping goodness quickly emptied the 2mL tank but the 1500mAh battery easily outlasted two refills (about 4-6ml). If you don’t want to refill often, you may consider the optional 4ml expansion kit.

The Veco One really excelled on direct lung direct lung hits. I tried closing down the airflow for some mouth to lung hits but it just did not give me a satisfying draw.

Finally, and also a bit surprising, the Veco One gave a fairly consistent vape throughout the life of the battery. I was surprised when the battery started winking at me as the vapor was still pretty strong.

Likes

  • Size
  • Simplicity
  • Vapor production and flavor
  • Top airflow – no leaks
  • Side USB connection

Dislikes

  • Whistle
  • Small tank capacity
  • MTL performance not great

Verdict

It seems that vaping has come full circle. Many of us started vaping an Ego style kit with a battery and clearomizer. The current crop of AIOs offer an evolution of the same concept but with higher wattage and better vapor production, while the operation remains virtually the same.

Another notable difference between the Veco One is the draw, and it excels as a direct lung hit device. If you want a MTL device it’s best to look elsewhere.

With the Veco One, or any other small kit, convenience often comes a compromise, yet the Veco One delivers performance far in excess of what I expected with thick, warm clouds of vapor and excellent flavor. The battery won’t last you all day, but it is enough to get you through a few hours of vaping – just make sure to fully charge your Veco One and pack a unicorn bottle of juice before you head out and you should be good to go.

Overall, the Veco One is a great little AIO which far exceeded my expectations and at less than 30 bucks, it is definitely worthy of your consideration.

Now It’s Available :

Vaporesso Veco One Plus Pen Kit

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

Nebula by Vaporesso – go to a new format

I am sure that you know Vaporesso perfectly . Also, you should know that the main activity of these guys is boxing fashion. They also have enough atomizers, but the popularity was gained thanks to the “boxes”. The most famous, of course, is the Target mod , released in several versions, including the mini version. Now the company’s actions are aimed at changing the situation. At the moment, several boxes have been announced, which are able to take the lead from the Target line . You could already see the review on Attitude and on the pro version of Tarot . Now it’s the turn of the Nebula , which has already become my favorite

Nebula by Vaporesso - go to a new format

Vaporessoalways knew how to do beautiful things, and in the case of the Nebula, the guys surpassed themselves. The design captures features similar to Attitude and Target mini . On the control panel, we see the same fire button, similar to the switch, and the + | – buttons, which are located next to the menu button.

The ergonomics of the body should allow it to lie well in the user’s hand. Even if it were not so, I would still not be very indignant. The device looks great. The abundance of options for the color of the case, and the insert on the case cover, which rather badly hints at the use of leather

Dimensions :

Height – 87 mm
Width – 48 mm.
Thickness – 32 mm.
Weight – 152 g.

Nebula by Vaporesso - go to a new format

Focus On www.ave40.com For More Vape Kits.   

Specifications :

To date, Vaporesso does not break into the 200W + segment. It seems that the guys have enough of the presence on the market of their Tarot Pro with a maximum power of 160W. Basically, all actions of the company are aimed at filling the middle segment. Nebula also falls into this category. The brains of boxing mod is the OMNI board , the analogue of which has already been installed in the company’s devices. In fact, this is a modern chip with all the necessary protections and other interesting features.

Nebula by Vaporesso - go to a new format

– adjustable power range – from 5 to 80W / 100W;
– adjustable voltage range – from 0 to 8.5V;
– maximum output current – up to 50A;
– supported resistance of the atomizer – from 0.05 to 5 ohm;
– temperature limit from 280 to 600 degrees Fahrenheit (100 – 315 Celsius);
– available modes of operation – Smart VW / CCW / VT (Ni200 / SS / Ti) / CCT / TCR / Bypass;
– 0.69 ”display.

Nebula by Vaporesso - go to a new format

The features of boxing include the choice of power source. The manufacturer has provided the possibility of using two types of batteries – 18650/26650. Yes, the very fact of such universality does not surprise anyone, but Vaporesso creatively approached the implementation. How did this issue solve other manufacturers? Included with the device came “case” for 18650. In Nebulaeverything is made more original – instead of a big “cover” we see something like a vape band, which is simply put on the battery. In my opinion, this idea is much more interesting

Nebula by Vaporesso - go to a new format

Nebula by Vaporesso - go to a new format

Well, how are you? In my opinion, Vaporesso confidently go their own way, and by this they are straining their competitors. I have no doubt that when all the new products of the company go on sale, the market leaders will have to make room. The most promising in this regard, it seems to me is the Nebula . Agree, a device with this design and performance characteristics simply cannot be unsuccessful

Now It’s Available :

Vaporesso Nebula 100W TC Kit

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

Smoant Knight V2 Starter Kit Review

The Smoant Knight V2 is an updated version of the Smoant Knight. It has a side-by-side design and offers up to 80W of power and temperature control modes from a single 18650. The kit comes with the Talos V1 tank. Let’s see how well it performs now…
Smoant Knight V2 Review
Manufacturing Quality

The manufacturing quality of the Knight V2 mod is good. It has a side-by-side design, which means the tank is recessed and sits beside the battery instead of on top. In this case, the tank isn’t fully recessed as some of it sticks out above the top of the mod.

The V2 model was updated so that the removeable battery is accessed with a magnetic door instead of a top cap on the mod. The magnet is strong, although there is a little bit of wiggle. It’s not enough to make it feel loose, but it is noticeable if you try to play with it. When you’re actually holding it and vaping, you can’t tell at all.

I’ll talk about power flexibility more below, but this is outfitted with all the different modes you could want from a modern vape, including TCR settings. The screen could be bigger, but it’s big enough that reading it isn’t too difficult. There are three buttons for adjusting the settings, one of which is also the fire button.

The materials and finish seem nice. It’s pretty light, so my guess is that it is made from aluminum.

The tank is okay. I was surprised to see that the kit still includes the Talos V1, which is the tank that Smoant shipped with the original Knight when you got a kit. It doesn’t seem to have been updated in anyway.

The nice features about the tank are that it has a 4.5ml capacity and there are at least 4 different coils that work in it. There is also a deck you can get to build your own coils.

Flavor Quality

.The flavor quality is good. The tank certainly isn’t the best one that I’ve ever tried, but it performs good enough and gets the job done. The vapor seemed slightly muted, although the cloud size was good for the wattage output.

In my opinion, this is probably a situation where you’d want to get a better tank to use with the mod. It should fit pretty much any tank that is 23mm or less.

Focus On www.ave40.com For More Vape Kits.   

Power Flexibility

The power flexibility of the Smoant V2 is good. Like I mentioned above, this has wattage and temperature control modes, plus TCR settings.

It can deliver up to 80W of power, and there are temperature control modes for nickel, titanium, and stainless steel.

The temperature range is 200F to 600F, and you can adjust the wattage in any of the TC modes. The minimum resistance is 0.1ohm.

Ease of Use

This kit is easy to use. In my opinion, Smoant did a good job with making the menu functions and corresponding button presses relatively intuitive – or at least not hard to remember.

As with most vapes, this shouldn’t take more than a few minutes to get the hang of using. Even complete beginners should be able to pick this up and be able to use it with minimal difficulties.

Portability

The portability of this is great. I’m a big fan of side-by-side or all-in-one designs when it comes to portability. In my opinion, having a tank sticking up above the top of your unit is not conducive to easy carrying, especially if you want to be able to put it in your pocket.

This has an almost completely open side, but still has a couple of pieces that wrap around your tank to make sure it is held securely in place. This should be great for the long term feasibility of carrying the mod in your pocket without causing problems.

Overall Experience

The Smoant Knight V2 is a great, beginner-friendly mod with a portable side-by-side design.

It’s far from the most impressive mod that I’ve ever used, but I think it would be a very solid choice for anyone with average power needs looking for a convenient, daily-use vape. Even if you sometimes enjoy more power, this is a good option for on-the-go use.

I could take or leave the tank, if I’m being honest. From what I can tell, this is only available as a kit so you don’t have the option of just getting the mod. I definitely recommend picking up another tank if you plan on using this a lot, but the Talos V1 isn’t a terrible one to get started on. The silver lining to all this is that the kit itself is extremely cheap to begin with.

Now It’s Available :

Smoant Knight V2 80W TC Kit

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9